Erdnase change undesirable noise.

[Lord Magic]

How do you eliminate the sliding noise of the cards when you do the change. I don't want to learn it the wrong way, but if you guys feel that there is a particular way of doing the change that doesn't make the noise, let me know.
I may not like relearning, but in the long run, it helps

 

[RealityOne]

It's a matter of using a light touch. There is a little noise when doing it right, but remember the cover for the move is that you are rubbing the top card with your hand which makes some noise.

 

[Hakaari]

don`t rush it...take your time and as RealityOne says...light touch.

if the noise still is a problem, do some talking to cover it up. "look as I turn this card into a turtle....oh wait, that was the other move"

 

[WitchDocIsIn]

Lift the double off the deck, then you only have to worry about contact with one card.

 

[Peripecio]

Don't worry about performing it as fast as possible, if you take your time and give it a light touch as others have said, you'll accomplish your goal. Acquiring a light and smooth move is hard when you perform it too quick, after you've done it slowly a few times you'll be able to perform the change faster.
Another tip is to pull the card a bit further so the card below doesn't "click" when you pull it over.

 

[ID4]

Jonathan Bayme has a different way of doing the erdnase change. It may help you with your issue

https://store.theory11.com/products/classic-color-change-jonathan-bayme

 

[Discy]

Noise? When I do the change, I don't hear any noise. You might be applying too much pressure when you slip the second card up.

 

[indocilis privata loqui]

It's definitely touch thing I had the same problem when I started that change. Try a lighter touch and don't move super fast.