-
Featured Tricks
NotarizedPHOENIXCandymanMagic 101Distancia -
Card Tricks
DispositionPetroleumOmegaDouble AgentLIT -
Coin Tricks
Perfect CentsMiRAGEALCHEMYCoinONETRIFECTA -
Cardistry
SpringThumb PropulsionFlickNB3Monument -
theory11 Artists
Blake Vogt Spidey Mathieu Bich Calen Morelli Jonathan Bayme Apollo Robbins Chris Kenner Dan Sperry Dan White Dimitri Arleri Ekaterina Jason England Justin Willman Luke Jermay Tom Isaacson Wayne Houchin Christen Gerhart Andy Nyman Dan & Dave Steve CohenMeet Our Artists
Awesome! Thanks so much! I am definitely familiar with obs, it’s what I use to record everything. That’s great to know! I appreciate the response.
You bet!
Just messing around with it today, it's super epic. I'd recommend it! As I'm sure you know, you could make your own with a screen shot and photoshop, but would look no where as good. Also you couldn't have the hand wobble unless you created a gif or video. So imo for the price its worth it in the end!
I installed this today and I've really enjoyed working with it so far. Is there a way to limit the affected area to only a corner?
Yep! Right click your source and click "filters". In your filters pop up, click magic mask. You can adjust left, right, up, and down. Just move it left and up so it covers one corner. (Or where ever you need your facade to be.)
I can "unmask" a corner and mask three quadrants. I guess I'm asking if I can mask only one quadrant. If I drag from any two sides, I mask FROM both of those sides into the spot. I want to mask from the left, for example, but then unmask the bottom half. Any ideas?
Not sure I'm understanding. I only see the 4 sliders (plus 1 for feathering). Each of these controls moves the mask into the frame from that entire side. Is there another setting or control that I'm not seeing?
AAAAK! So sorry! Totally forgot to write back. So here's what to do. Boost ALL of the four position sliders to 100%. Everything will be reversed (i.e. up is down, left is right) this is ok. Now just decrease the desired slider (remember, its reversed) horizontally and vertically until you have the box in the corner!
So if you want a box in the top right,
Boost everything to 100,
Decrease the left half way,
Decrease the bottom half way.
Hope this makes sense! Takes a little messing around, but remember, boost everything to 100, then start decreasing stuff until it matches. If you would like, I can make a little video for you to illustrate what I mean!
Andrew Neiner
Think. Create. Inspire.
So if you want a box in the top right,
Boost everything to 100,
Decrease the left half way,
Decrease the bottom half way.
Hope this makes sense! Takes a little messing around, but remember, boost everything to 100, then start decreasing stuff until it matches. If you would like, I can make a little video for you to illustrate what I mean!
Andrew Neiner
Think. Create. Inspire.
I got it. Thank you. To get a box in the top left, I put everything to 100% and then reduced left and top to the appropriate settings. It seems odd but that's what worked.
I just cannot get this to work, and am totally confused by the software. But I think the biggest problem I have is that whatever I manage to do to the picture within the OBS application, I just can't get it to feed through to my Zoom (or whatever) app. And yes, I did turn "Start Virtual video" on.
Any advice would be greatly appreciated because I'm starting to resign myself to the idea I've wasted sixty bucks here.
Any advice would be greatly appreciated because I'm starting to resign myself to the idea I've wasted sixty bucks here.
Jack, if you would like I can jump on a Zoom call with you and show you my set up. Contact me if you'd like to pursue this.
That's really good of you, and would be helpful! I'm away from my main computer right now... would you be available tomorrow? If not we can figure out a time that suits us both. I'm in the UK, by the way, so there's that five-hour time difference. What's the best way to private message on these forums (I'm new!)