I'm a huge fan of psychokinesis, both of my DVDs are on PK and the majority of my working rep consists of such things. Metal bending is a subject close to my heart, so it was no secret that I've been looking forward to Liquid Metal 2 since I heard about the project.
There are lots of sources to learn the basics of metal bending out there in book, DVD and download form, however, I've NEVER seen anyone do to cutlery what Morgan does to his forks.
The Effect: So how does the routine differ from Liquid Metal 1? (Which, by the way, is also taught in it's entirety on this DVD)
LM2 has similarities to LM1, however, it's got some massive differences that take the routine to a totally different place. It's a very, VERY unique looking routine.
You have two forks, you find a place on the floor or the wall in which a shadow is cast. You have the spectators watch the shadow of the fork and it simply melts. You then ask a spectator to rub the shadow, the fork begins to bend further, reacting to their 'shadow-touch.' From there, you have the spectator literally pluck the shadow of the head of the fork from the handle - sure enough, the actual head of the fork flies off the handle.
You twist and bend another fork like the original LM1 fork, you also twist one of the tines though - The visual here is INCREDIBLE.
The final phase of the routine is what Morgan calls 'the destruction.' The fork literally FALLS APART at your fingertips and the fingertips of a spectator. The tines melt and drop off and the head too. Again, this looks insane and would be impossible to replicate even with brute strength or a set of pliers!
Practicality: LM2 does require a bit of set up, but it's not a massive amount. 5 minutes would do you fine and you could blitz through a bunch of forks in one sitting.
I should note that Morgan goes in depth into the brands and types of forks that are best to use at each level and what he uses personally. What this guy doesn't know about forks you could write on the inside of a single tine.
Aside from the set up, the routine is just as practical as the original, the only phase that needs any kind of 'special conditions' is the shadow phase, in which you need light to be present - You could happily do this with the stylized light in a nightclub or in sunlight, but if you did have any difficulty with finding a shadow, you can just switch it out for the first phase of original liquid metal.
Teaching: As always, Morgan's teaching style is thorough and at a pace that's easy to understand, it's a clear studio explanation over the space of an hour and there are close ups throughout. Not much to say here - It's great.
Overall thoughts: If you like the look of the routine, it does what it says on the tin. If you're looking for an easy entry to metal bending, Morgan goes over everything you need to know to go from zero to hero.
A great release from Strebler, a high quality video that teaches an amazing routine. It's great value and I'd recommend it to anyone, magicians and mentalists alike.
DC.
There are lots of sources to learn the basics of metal bending out there in book, DVD and download form, however, I've NEVER seen anyone do to cutlery what Morgan does to his forks.
The Effect: So how does the routine differ from Liquid Metal 1? (Which, by the way, is also taught in it's entirety on this DVD)
LM2 has similarities to LM1, however, it's got some massive differences that take the routine to a totally different place. It's a very, VERY unique looking routine.
You have two forks, you find a place on the floor or the wall in which a shadow is cast. You have the spectators watch the shadow of the fork and it simply melts. You then ask a spectator to rub the shadow, the fork begins to bend further, reacting to their 'shadow-touch.' From there, you have the spectator literally pluck the shadow of the head of the fork from the handle - sure enough, the actual head of the fork flies off the handle.
You twist and bend another fork like the original LM1 fork, you also twist one of the tines though - The visual here is INCREDIBLE.
The final phase of the routine is what Morgan calls 'the destruction.' The fork literally FALLS APART at your fingertips and the fingertips of a spectator. The tines melt and drop off and the head too. Again, this looks insane and would be impossible to replicate even with brute strength or a set of pliers!
Practicality: LM2 does require a bit of set up, but it's not a massive amount. 5 minutes would do you fine and you could blitz through a bunch of forks in one sitting.
I should note that Morgan goes in depth into the brands and types of forks that are best to use at each level and what he uses personally. What this guy doesn't know about forks you could write on the inside of a single tine.
Aside from the set up, the routine is just as practical as the original, the only phase that needs any kind of 'special conditions' is the shadow phase, in which you need light to be present - You could happily do this with the stylized light in a nightclub or in sunlight, but if you did have any difficulty with finding a shadow, you can just switch it out for the first phase of original liquid metal.
Teaching: As always, Morgan's teaching style is thorough and at a pace that's easy to understand, it's a clear studio explanation over the space of an hour and there are close ups throughout. Not much to say here - It's great.
Overall thoughts: If you like the look of the routine, it does what it says on the tin. If you're looking for an easy entry to metal bending, Morgan goes over everything you need to know to go from zero to hero.
A great release from Strebler, a high quality video that teaches an amazing routine. It's great value and I'd recommend it to anyone, magicians and mentalists alike.
DC.